【Forklift LED Light】 We would like to introduce some reliable LED warning lights to your forklift truck.

Reasons for Using LED Safety Warning Light on Forklift Truck.

• Reduce heavy equipment accidents.
• Reduce work errors.
• Reduce property losses and damage.  
• Reduce the chance of forklift hitting people.

Why use blue/red Led safety warning lights on forklift trucks？

Vanten LED safety warning light is made of a lens, a polycarbonate shell, rust and corrosion prevention, a universal mount, suitable for forklift trucks.

When the LED safety warning spotlight assembly is installed on a forklift or other moving vehicle, it will project a bright blue or red beam pattern on the floor surface.

Blue Spot Beam

Arrow Beam

Linear Beam

The blue and red light areas are commonly referred to as halo areas to indicate where workers can safely stand and to help prevent foot injuries and rear-end swinging collisions by showing other mobile warehouse equipment a safety zone around the forklift. On the back, warehouse workers tell them where they can safely stand.

The powerful light beam of the vehicle LED lamp is durable and can be used continuously for more than 12 hours every day, and basically can be replaced.

This time, we would like to introduce some reliable LED warning lights to your forklift truck.

VS03

Spot/Arrow beam

Blue /Red Color

Mounted on the front/rear ends of the vehicle. In the intersection, the corridor loud noise environment plays a security warning is particularly effective.

VS04

Spot/Arrow beam

Blue /Red Color

Super Bright: Forklift LED Spot Lights are designed as spot Arrow beam, blue/red color and Super Bright.

Lower Power Consumption + High Efficiency of Heat Dissipation: aluminum housing helps dissipate heat quickly so it can work for a longer time.

Waterproof + Dustproof Design: IP68 rated waterproof, Shock and vibration resistant design make it perfect for operating environment such as a warehouse.

VS05

Linear Beam

Blue /Red Color

High efficiency and Output 30 Watt LED Forklift Light, Bright light alerts pedestrians and other vehicles of forklifts approaching blind corners and exiting semi-trailers.

Strong Red-line lights are projected at the front/rear/left/right end of the vehicle to alert other vehicles to the other oncoming vehicles.

VS06

Linear Beam

Blue /Red Color

Create a red/blue zone to the floor, this beam is a visual indicator of the safe distance pedestrians should keep between themselves and the forklift. By staying outside of this perimeter, pedestrians will avoid foot injury and collision from rear end swing.

The 60-degree flood beam is an excellent work light which illuminates wide and short areas.

Easy installation, Sturdy hardware, and excellent light.

VS08

Linear Beam

Blue /Red Color

A bright blue/red light on the floor to help remind pedestrians, loaders, unmanned vehicles and other industrial vehicles not close to the forklift.

Use blue and red LED forklift safety lights to make your warehouse safer.

The purpose is to remind people to pay attention to nearby forklifts, scissor lifts, order pickers or other warehouse vehicles, and form a visual barrier around them, indicating the direction and speed of the vehicle.

Red and blue lights project striking light beams onto the floor to form Spot/Arrow/Linear light beams to supplement standby alarms.

We would like to introduce ourselves.

Vanten Industrial Group Limited is a manufacturer that specialized in LED automotive lighting products from 2010. We have a scientific, normative and integrated management system, and become a very powerful automotive electronics manufacturer in China.

There are more than 2000 square meters. We are a dynamic and innovative manufacturer, which is engaging in research and development, production and sales.

Our main products are forklift LED strobe lights, LED Headlight kit, LED Fog Light, LED Interior Bulbs, LED Turn Light, LED Driving Light, LED Work Light, LED Light Bar, etc. We have our own brand VLED, and also provide OEM and ODM services.

Our website：https://www.vanten.co.uk/ or https://www.vantenled.com

We hope that our LED forklift safety warning light can ensure your workplace safety and improve your work efficiency, which is what we are pursuing.

Why Should Forklift Safety Get Our Attention？

The forklift weighs more than three tons and can reach a speed of 18 mph. These big guys are very helpful to our warehouse work, at the same time, It is also a source of great danger. Use these forklift safety warning lights to ensure your safety.

Use these forklift safety warning lights to ensure your safety.

The following are three accident statistics that should be given extra care and attention when operating forklift trucks.

• Forklift trucks kill about 85 people every year.
• Forklift accidents causing serious injuries in total 34,900 each year.
• Non-serious injuries related to forklift accidents reach 61,800 people per year.

If the company implements stricter training policies, the Occupational Safety and Health Administration (OSHA) estimates that about 70% of forklift accidents in the United States can be prevented.

Why are forklifts so dangerous? There are many reasons.

• They can weigh 9,000 pounds, three times as much as many cars.
• They can travel up to 18 mph.
• Unlike cars, forklifts only have brakes at the front, which makes braking more difficult.
• The rear of the forklift is heavier to compensate for the heavy load carried by the front. This uneven weight distribution will make the forklift difficult to operate.
• The rear wheel rotates the forklift, causing the rear end to swing outward. This increases the chance of tipping over during sharp turns.
• The load is carried by the front of the forklift, which may hinder the driver’s sight.
• Forklift trucks are often used to lift heavy goods to quite high heights. This combination is always very dangerous.

Forklift trucks are special equipment commonly used in factories due to their flexible and convenient handling and transportation functions.

Forklift truck operation is affected by unstable driving route area, poor working environment light, poor driving sight, surrounding equipment, facilities, and personnel, etc., resulting in frequent forklift truck accidents.

All forklift trucks are equipped with LED warning lights. High-brightness light beams are installed in front, back, left and right of the forklift truck body to project onto the road surface, generating clear blue light and light beams around and moving along with the movement of the forklift truck.

Especially in a noisy working environment, when the sound warning cannot meet the safety requirements, the warning light will play an important role in reminding the surrounding workers to prevent forklift accidents.

Forklift safety warning light is a warning function that an LED lamp emits blue light or red light onto the ground through a condensing concave-convex ball.

The warning lights we see in our daily life are flashing red and blue, why?

Because red is the primary color in the warm color system and has warning function, while blue is the primary color in the cold color system, which is in sharp contrast with red and can attract people’s attention.

Forklift safety should receive our attention.

Vanten LED is a Forklift LED Lights Wholesaler, the danger is often caused by inconspicuous negligence. Don’t regret it when something happens. Understand our products and give you a safe forklift working environment.

Our website：https://www.vanten.co.uk/ or https://www.vantenled.com

You have to understand the types of car lights!

The use of car lights has a direct relationship with driving safety. Proper use of car lights can not only protect their own safety but also create an orderly traffic environment.

Car lights include:

Headlight

Headlights are of two types-low beam and high beam. They are mainly used for roads and objects in front of the light tower to ensure driving safety. R drivers can see the roads in the dark, and at the same time send signals to other drivers about the existence of cars.

The low beam provides light distribution to provide sufficient forward and lateral illumination without blinding other road users due to excessive glare.

High beam lights provide a strong, center-weighted light distribution with no special control over glare and should only be used when there are no cars visible in front of you.

The alternating changes of high beam and the low beam can be used as overtaking signals at night.

Headlights are installed on both sides of the car’s head. Each car is equipped with 2 or 4 headlights.

Taillight

The tail lights only need to emit red light at the rear of the vehicle and have wires installed to light up when the headlights are turned on, which helps the driver following you to recognize your position.

Daytime Running Lights

Daytime driving lights are located at the front and rear of cars and usually turn on automatically, although on some cars you can choose to turn them off.

They are designed to make it easier for you to be seen by other cars, but some drivers find them distracting the oncoming cars.

Fog light

Fog lamps are installed near or slightly lower than headlights. It is used as a light fixture to illuminate roads and provide signals to oncoming vehicles under conditions of low visibility such as fog, snow, heavy rain or dust.

Most of the lights are yellow because the yellow light wave is longer and has good fog permeability.

Signal light

Also known as turn signal lights or “flashlights”, they are located at the front and rear of the car, next to the headlights and taillights.

When activated, they indicate to other drivers that you will turn quickly and may slow down.

Brake light

They are located next to the taillights and signal to the driver that you are slowing down or stopping.

They will only be activated when the brakes are applied, so you don’t need to worry about their misuse.

However, you must ensure that they are properly maintained and will not burn down.

Driving light

They are located in the cab of your vehicle and are used to illuminate the cab so that passengers or drivers can safely check the map or direction or find items in the dark. They must not be used for a long time.

Reversing light

The reversing lamp is installed at the rear of the car and is used to illuminate the road behind the car and inform the vehicle and pedestrians that the vehicle is reversing or preparing to reverse. It also has the function of a light signal device.

License plate lamp

The license plate lamp is installed above the license plate at the rear of the vehicle, and its purpose is to illuminate the license plate at the rear of the vehicle. The requirement is that the number on the license plate can be clearly seen 20M behind the car at night.

Overhead light

Lamps and lanterns installed in the cab or at the top of the car for lighting in the cab. The dome light is white, and the lampshades are mostly made of transparent plastic.

Instrument light

It is a tool for instrument lighting and is often connected to the instrument panel.

Step lamp

It is a lamp used to illuminate the step of the car door and facilitate passengers to get on and off.

Luggage lamp

It is a lamp in the trunk of a car.

Tool lamp

It is used for repairing automobiles. The automobile is equipped with a working lamp socket and a movable lamp with wires.

Don’t underestimate these small lights, they play a very important role in the driving of the car.

Ok，if you want to know about automotive lights (Vanten LED), you can visit our blog (vantenled.blogspot.com) and visit our website (www.vanten.co.uk) (www.vantenled.com).

We want LED warning lights to be your patron saint to ensure your safety.

LED Vehicle-mounted warning lights, as the name implies, are lamps installed on vehicles to give warnings, especially for engineering vehicles. Vehicle-mounted warning lights are lamps that alert pedestrians around vehicles by emitting more striking light.

Some on-board warning lights may also have built-in buzzers or horns to give alarm sounds to give people audible and visual warning signals so that people around the vehicle can clearly find the vehicle, stay away from the vehicle as far as possible and avoid accidents.

In general, LED warning lights are usually used in police cars, engineering vehicles, fire engines, ambulances, preventive management vehicles, road maintenance vehicles, tractors, emergency A/S vehicles, mechanical equipment, etc.

Depending on the type of car and its use, the length of the LED warning light, the structure of the lampshade combination and the composite color are also different.

The Function of LED Warning Light in Different Scenes.

1. The construction site

LED Warning lights are indispensable in road construction, especially in dark nights, when road conditions are unknown, accidents are easily caused, and warning lights are needed at this time.

2.The car on the road.

Long-term driving is always accompanied by some problems, of course, this is normal.

We need to stop on the road, in order to ensure safety, we need to put warning lights around the vehicles to remind the vehicles to notice the new obstacles ahead, slow down and drive safely.

The LED warning light with good performance can expand the visual range, allowing other drivers to see it more clearly.

What types of vehicles need LED warning lights?

1. Trailer

Trailer drivers need stable lights and often use LED flashing amber lights to remind drivers passing by when they stop at the roadside.

2. Construction vehicles

Another common flash lamp is a construction vehicle.

When carrying out construction on public roads or public places, construction vehicles use LED warning lights to remind drivers to ensure the safety of workers and illuminate the area, such as tractors and trailers and utility vehicles.

For engineering vehicles, LED warning light strips are more suitable because they provide the highest efficiency, flexibility, and durability

LED warning light bars can be used for large trucks and machinery, of course, smaller light bars can be used on auxiliary vehicles.

3. Farm equipment

Agriculture is a huge operation process. Surprisingly, farmers use a large number of flashing LED warning lights.

Because LED warning lights are used for large mechanical equipment such as harvesters and auxiliary vehicles.

More importantly, farm equipment can use anything from LED light bars to amber flash lamps.

Don’t underestimate, it is very important for farm equipment to be equipped with internal and external lighting.

We want LED warning lights to be your patron saint, to ensure your construction safety, to ensure your driving safety, to ensure your agricultural work safety at night, but also to ensure your safety.

VANTEN LED （www.vantenled.com）offers LED warning lights, LED headlights, work lights, and light bars. If you want to know more about LEDs, please feel free to ask us. We hope our LED lights can light your life and protect you.

I can't imagine what a 90,000 lumen super LED flashlight looks like.

Before introducing, we need to know what the lumen is.

Lumens refers to the measurement of visible light emitted from a light source. The greater the number of lumens, the greater the visibility.

From another perspective, lumens are very romantic optical units, which can be used to describe the brightness that eyes feel, such as how many lumens moonlight is, candles on the dining table, Disney fireworks, and LED automotive lights that take you home.

Four years ago, the handicraft emperor rctestflight made a super LED flashlight with a height of 1,000 watts and nearly 90,000 lumens.

This homemade flashlight light bar uses ten 100W LED chips to produce an estimated 90,000 Lumens of light.

Let’s look at the 90,000 lumens super LED flashlight with how bright.

Outdoor high-power LED flashlight.

LED car lights.

This homemade flashlight light bar.

Open for a moment, as if the whole world is lit up.

Just like a sudden flash of lightning, neighbors have to wonder if aliens are visiting.

We know that the LED bulbs we usually use are about 3W to 7W. This is amazing.

Life is always full of creativity, and even a small LED can be so powerful.

Vantened LED can also bring you such a surprise and make you admire it.

You will ask, what is Vanten LED?

VANTEN LED （www.vanten.co.uk）offers LED headlights, work lights, and light bars. If you have any questions about LEDs, please feel free to ask us. We will provide the most professional answers and considerate services.