1. Timely check the car working condition of the instrument
The main purpose of driving at night to check the dashboard is to listen and watch, observe whether the engine and chassis have abnormal noise or smell, keep driving at a moderate speed, pay attention to increasing the distance with the vehicle, and be ready to stop at any time to prevent collision between the front and rear vehicles.
2. Pay attention to the use of lights
When driving on roads with street lamps, anti-glare lamps or dipped beam lamps and marker lamps can be used. When driving through the intersection at night, you should slow down at a distance of 50-100 meters from the intersection, change the high beam light to the low beam light, and turn on the turn signal to indicate the direction of travel.
3. Pay attention to the conversion of near and far light
In cities, pay attention to pedestrians crossing the road. When driving at night, the low beam light should be used when the vehicle speed is below 30km/h, and the light should illuminate 30m away; when the vehicle speed is above 30km/h, the high beam light should be used, and the light must illuminate 100m away.
4. Respond to unexpected road conditions in a timely manner.
When reversing or turning around, you must find out the moving terrain, the safety limits of the upper and lower parts and the surrounding areas, and then reverse or turn around. leave more room for entering or turning around. if you cannot see the target clearly, you can use a flashlight or other lights to illuminate.
5. Use the method of repeated exchange of near and far lights to replace the horn.
No horn is generally used for driving at night, and the method of repeatedly exchanging near and far lights is usually adopted. When parking temporarily at night or for some reason, the marker light and license plate light should be turned on.
When driving at night, overtaking should be avoided as much as possible. When overtaking is necessary, the front situation should be accurately identified, then the front car should be followed up, the near and far lights should be continuously changed, the front car should be warned to avoid, and the distance between workshops should be appropriately increased during overtaking.
6. Please use car headlights with high brightness and long range.
In order to save costs, general automobile factories only equip their vehicles with halogen lamps. Halogen lamps have a short range, narrow-angle and low brightness, which are only less than 800 lumens and have extremely fast light decay. Generally, they can only be used for 200 hours.
The Vanten LED headlamps to have ultra-high brightness, which can increase the visible area of 40-60 meters for your driving, increase the emergency response for 2-3.5 seconds, and greatly increase the driving safety.
At the same time, the auxiliary function of blind areas on both sides of the front of the car is introduced to enable the driver to find the danger ahead and on both sides more quickly, thus ensuring the driving safety.
Vanten LED headlamps do not need to be preheated and started like halogen lamps and xenon lamps, and can reach maximum brightness at the moment of starting, allowing you to see the intersection and pedestrians in front in time.
In addition, LED lamps have a working life of tens of thousands of hours, which is more than 20 times that of halogen lamps and xenon lamps, and the aging light attenuation is longer than that of halogen lamps and xenon lamps, thus reducing the trouble and time for you to change lamps frequently.
If you want to learn more，please pay attention to us and visit our website （VANTEN LED：https://www.vanten.co.uk or https://www.vantenled.com）
No comments:
Post a Comment